Home › Forums › Education Modules › Shift Registers › silkscreen not correct for 74H595 and LEDs board
This topic contains 0 replies, has 1 voice, and was last updated by Don 4 months ago.
The silkscreen for the Breakout Board Debounced Buttons with 74H595 and LEDs I received is incorrect, or the PCB routing is incorrect, take your pick.
Silkscreen text as found, top down (so one can read the text):
After a considerable amount of frustration (I kept blaming my Arduino boards…) I find the pinout to be as the picture for the Manual Serial Communications Trainer Prototype:
You must be logged in to reply to this topic.